License Conditions - HEIDENHAIN 1189852-01 Replacing Instructions

License conditions

HEIDENHAIN does not maintain the following NC software versions any more:
34049x-01
Please note the following license conditions:
The obsolete software mentioned-above is not maintained any more. Thus HEIDENHAIN recommends expressly
using the current software.
The obsolete software mentioned-above must exclusively be used for service purposes, e.g. replacement of the
control hardware or exchange of the hard disk.
The user is only allowed to forward any HEIDENHAIN NC software to other persons (including other employees of
the user company) if HEIDENHAIN gives its separate written consent. Reproduction for the purposes of passing on
to other persons is only permitted if HEIDENHAIN gives its separate consent.
HEIDENHAIN NC software must not be changed, processed or re-engineered.
In addition, the general Terms of Use for the web pages of HEIDENHAIN and the relevant additional regulations for
the Private Portal Access shall also apply.
Licenses for third party suppliers
Windows XPe and Windows 2000 are registered trademarks of the Microsoft Corporation.
28
34049x-02 34049x-03 34049x-04 34049x-05