Advertisement

Quest
MANUAL
Visit VulyPlay.com/Installation
for video instructions

Advertisement

Table of Contents
loading

Summary of Contents for Vuly Quest

  • Page 1 Quest MANUAL Visit VulyPlay.com/Installation for video instructions...
  • Page 2 • Ensure that the system is secured with anchors or bolts before use. YOU WILL NEED FOR ASSEMBLY! • Ladder • Rubber mallet • Tape measure or ruler Vuly Play 95 Ingleston Rd, Brisbane QLD 4154 AU: 1300 667 514 US: 1-800-467-1421 www.vulyplay.com...
  • Page 3: Table Of Contents

    1.4. Weather care 2.0. Usage and behaviour 2.1. Safe use information 2.2. Safe use instructions 3.0. Pre-assembly 3.1. Parts Reference 4.0. Assembly instructions – Vuly Quest 5.0. Product registration 6.0. Half-price replacement parts 7.0. Warranty 8.1. Warranty periods 8.2. Inclusions 8.3.
  • Page 4: Care And Maintenance

    Retain this Manual. • Inspect before and after each use. • Replace any worn, deteriorated, defective or missing parts immediately and only through Vuly. • Tighten all hardware, including elements that secure the system to the ground. • Keep away objects that could damage textile components.
  • Page 5: Usage And Behaviour

    2.0. Usage and behaviour Improper use of, or behaviour on, your system can lead to serious injury. Please follow these usage and behaviour instructions to ensure safe play. 2.1. Safe use information • Maximum user weight: 750 kg. • Domestic and outdoor use only. •...
  • Page 6: Pre-Assembly

    3.0. Pre-assembly • Install the system on level ground and in a well- lit area, impact-attenuating properties – such as grass. A fall no less than 2 m (6 ft) from any structure or obstruction – onto a hard surface can result in serious injury or such as a fence, garage, house, overhanging branches, death to the equipment user.
  • Page 7 BOX B ALL SIZES: Part Colour: Orange 1x Step Attachment 1x Step 3x Step Tube Part Colour: Black Part Colour: Silver 8x Foot 4x Lower Frame Tube BOX C ALL SIZES: Part Colour: Orange Part Colour: Silver 4x Flip Rail 4x Flip Tube 4x Angled 4x T-Joiner...
  • Page 8 BOX F LARGE AND EXTRA LARGE : Part Colour: Orange 2x Lower Outer Leg Tube 2x Upper Outer Leg Tube Part Colour: Silver 2x Joiner Tube 2x 4-Way Joiner 2x Feet BOX G LARGE : Part Colour: Black Part Colour: Silver 2x Large Top Rail 4x Upper Frame Tube...
  • Page 9 SHADE COVER EXTRA LARGE BOX 1x 1-hole Long Outer 1x 2-hole Long Outer 1x Shade Cover Shade Tube Shade Tube 2x Short Outer Shade Tube 5x i-Bolt 5x Tension Hook SHADE COVER LARGE BOX 1x Long Outer Shade Tube 1x Long Shade Tube 1x Shade Cover 2x Short Outer Shade Tube 1x Short Shade Tube...
  • Page 10: Assembly Instructions - Vuly Quest

    2x Long Shade Tube 2x Short Shade Tube 5x i-Bolt 4x Shade Joiner 5x Tension Hook 4.0. Assembly instructions – Vuly Quest PRE-ASSEMBLY You will require the following: • Ladder • Rubber mallet • Tape measure or ruler ENSURE THAT AS YOU ASSEMBLE THE PRODUCT, YOU FIRMLY TIGHTEN ALL NUTS AND BOLTS, UNLESS DIRECTED.
  • Page 11 ALL SIZES: STEP Insert each of the Climbing Bars into the Connect the remaining Climbing Rail to the other ends of the Climbing Bars. completed Climbing Rail, as shown below. Make sure that the straight Climbing Bars are in the middle, and the curved ends of the other Climbing Bars are in the shorter ends of the Climbing Rails.
  • Page 12 STEP ALL SIZES: Insert Step Tubes between Repeat for the top holes on the sides, but use two pairs of Lower Frame a Step Tube for one and a Step for the other. Tubes, into the bottom holes on the sides. Note: If you are attaching a Cargo Net, you will not use this top...
  • Page 13 STEP MEDIUM: Insert a T-Joiner at the top of each Lower Frame Tube. Slide both T-Joiner and Lower Frame Tube pairs into the bottom of the Upper Frame Tubes to complete the Ensure that they’re positioned at 45° angles, facing climbing frame section.
  • Page 14 MEDIUM: STEP Attach the completed Large Top Rails to the top of the Upper Frame Tubes. Note: If you have accessories, make sure to face the smaller ends of the Top Rail to the side where you will attach those accessories.
  • Page 15 STEP EXTRA LARGE Connect a T-Joiner to both ends of an Extra Large Top Rail. Repeat for the 1 remaining Extra Large Top Rail. STEP EXTRA LARGE Attach the completed Extra Large Top Rails to the top of the Upper Frame Tubes. STEP EXTRA LARGE Slide both Lower Frame Tube pairs into the...
  • Page 16 SHADE COVER - MEDIUM STEP Insert Shade Joiners into the shorter ends of Insert the completed Shade Joiner and Shade Tube each Long and Short Shade Tube. pairs into the tops of the Upper Frame Tubes, angled outwards, as shown. CONTINUE TO STEP 23 FOR MEDIUM SHADE COVER –...
  • Page 17 LARGE AND EXTRA LARGE STEP Insert a 4-way Joiner into the top of both Upper Outer Tubes. Connect a Long Outer Shade Tube through the other end of one 3-way Joiner, and a Short Outer Shade Tube through the other. Note: Make sure all screws face downwards.
  • Page 18 EXTRA LARGE STEP Repeat Steps 16-19 to complete the other side of your outer section. LARGE AND EXTRA LARGE STEP Important: Ensure that your frame matches the below – Slide the Long Side Rail and Short Side Rail into the Top Rails above the climbing bars, as indicated for your particularly the Shade Tubes.
  • Page 19 Long Shade Tube. Tension Hooks, as shown for your model. ALL SIZES STEP Secure your completed Quest to the ground with the Anchors provided. Ensure that all bolts are firmly secure. CONGRATULATIONS! You have assembled your Quest monkey bar.
  • Page 20: Product Registration

    Vuly. and completing the form with a proof of purchase. Customers who purchase directly from Vuly (through VulyPlay. com, at the Vuly Showroom or over the phone) automatically have their product registered. 6.0. Half-price replacement parts...
  • Page 21: Inclusions

    7.4. Warranty Claims 7.3.2. Damage through weather conditions If a customer believes that a Vuly product is faulty or defective, Damage to the product that results from weather events – they must discontinue use and submit a Warranty Claim.
  • Page 22: Australian Consumer Law

    7.4.5 Claiming on non-Vuly products 8.0. Missing parts If a customer believes that a Vuly product does not include Vuly products are delivered to Vuly warehouses prepackaged; all necessary parts, they must immediately lodge a Missing we are unable to check the boxes prior to delivery to ensure Parts Claim at VulyPlay.com/Support.
  • Page 24 vulyplay.com...

Table of Contents