1. Manuals
  2. Brands
  3. Vuly Manuals
  4. Play Sets & Playground Equipment
  5. 360 Pro
  6. Assembly manual

Vuly 360 Pro Assembly Manual

Cubby house or play set
Hide thumbs Also See for 360 Pro:
Table of Contents

Advertisement

Quick Links

360 Pro
Cubby House or Play Set
ASSEMBLY MANUAL
Visit VulyPlay.com/Installation
for video instructions

Advertisement

Table of Contents
loading

Related Manuals for Vuly 360 Pro

Summary of Contents for Vuly 360 Pro

  • Page 1 360 Pro Cubby House or Play Set ASSEMBLY MANUAL Visit VulyPlay.com/Installation for video instructions...
  • Page 2 • Maximum combined user weight per swing set section – 150 kg (330 lb). • Adult assembly required. Adult supervision required at all times. • Ensure that 360 Pro is secured with anchors or bolts before use. Vuly Play 95 Ingleston Rd, Brisbane QLD 4154...

  • Page 3: Table Of Contents

    5.2. Assembly – Cubby House only 5.3. Assembly – Onto the end of an existing 360 Pro Swing Set 6.0. Installation: 360 Pro Play Set (with Cubby House at the end of the Swing Set frame) 6.1. Parts checklist – Play Set (Cubby end) 6.2.

  • Page 4: Care And Maintenance

    1.0. Care and maintenance At the beginning of each play session: • Tighten all hardware. • Check all protective coverings on bolts, pipes, edges, and corners. ○ Replace if they are loose, cracked, or missing. • Check all moving parts – including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. ○...

  • Page 5: Safety Information

    2.0. Safety Information Maximum Cubby House fall height: 1,200 mm (47 inc.) 2.1.3.2. Do not install loose fill surfacing over hard surfaces such as concrete or asphalt. Maximum Swing fall height: 2,226 mm (88 in.) 2.2. Poured-In-Place Surfaces Pre- United States Consumer Product Safety Commission’s Manufactured Rubber Tiles (USCPSC) Outdoor Home Playground Safety Handbook.

  • Page 6: Operating Instructions

    3.0. Operating Instructions • Warning: Instruct children not to climb when the Observing the following statements and warnings reduces the likelihood of serious or fatal injury: equipment is wet. • Warning: Check the openings between rollers and sliding surfaces of roller slides for foreign materials •...

  • Page 7: Installation: 360 Pro Cubby House

    Assemble a full 360 Pro Play Set… With Cubby House as pictured With Cubby House as pictured 7.0. Installation: 360 Pro Play Set (with Cubby 6.0. Installation: 360 Pro Play Set (with Cubby House inside the Swing Set frame) House at the end of the Swing Set frame) 5.0.
  • Page 8 2x Frame Joiner (left) 2x Frame Joiner (right) 4x Mat Frame Tubes 4x May Frame Corners 1x Cubby Rail 1x Cubby Mat 1x Cubby Net 1x Cubby Tent 5x Toggles 4x Pads 1x Climbing Rope 1x Sand Pit 40x Frame Bolts 4x Long Bolts 4x Short Bolts 12x Anchors...

  • Page 9: Assembly - Cubby House Only

    Additional, to attach to the end of an existing 360 Pro Swing Set (to create a Play Set): 1x Cubby Rail 1x Rail Joiner 4x Frame Bolts 5.2. Assembly – Cubby House only STEP STEP A. Connect the one-way Top Joiner into one end of a Cubby Rail, and connect the other end into the two-way Top Joiner.
  • Page 10 STEP B. Take the remaining left and right Frame Joiners, and A. Take your Climbing Rope and slip the two loops insert both into the ends of the Frame Tube. along the top through both ends of a Frame Tube. C.
  • Page 11 STEP A. Lay out your Cubby Mat, with the clip hooks facing downwards. B. Take your Cubby Net and lay it on top of your Cubby Mat – matching the sides and corners of the Net with those of the Mat. IMPORTANT: Ensure that the door on the Cubby Net is not positioned on one of the sides of the Mat Frame Tube to which you connected Short Bolts and Nuts in Step 6.
  • Page 12 B. Loop the Fastening Straps on the Sand Pit around each assembled Cubby House. Fill it with the desired amount Frame Leg, and clip them together. of sand. STEP Attach the Light to the inside of your Cubby House. CONGRATULATIONS! You have assembled your Vuly 360 Pro Cubby House!
  • Page 13 House into the end of the Swing (or Spin) Rail on your existing Bolts and Nuts. 360 Pro Swing Set. CONGRATULATIONS! You have attached your Cubby House onto the end of your Swing Set, and created a Vuly 360 Pro Play Set!

  • Page 14: Installation: 360 Pro Play Set (With Cubby House At The End Of The Swing Set Frame)

    6.0. Installation: 360 Pro Play Set WITH CUBBY HOUSE AT THE END OF THE SWING SET FRAME 6.1. Parts checklist - Play Set (Cubby end) In your 360 Pro Cubby House boxes: 4x Mat Frame Tubes 4x Mat Frame Corners...
  • Page 15 4x Rubber 4x Pads 6x Anchors 24x Frame Bolts 1x Tool Set 1x Light Take from your 360 Pro Swing Set boxes: 1x Top Joiner (one-way) 2x Frame Legs 3x Frame Tubes 1x Frame Joiner (left) 1x Frame Joiner (right)

  • Page 16: Assembly - Play Set (Cubby End)

    Ensure that you lock all parts together securely with Frame House into the end of the Swing (or Spin) Rail on the your Bolts and Nuts. partly-assembled Swing Set. CONGRATULATIONS! You have assembled your Vuly 360 Pro Play Set! See your Swing instructions to attach your chosen Swings.

  • Page 17: Installation: 360 Pro Play Set (With Cubby House Inside The Swing Set Frame)

    7.0. Installation: 360 Pro Play Set WITH CUBBY HOUSE INSIDE THE SWING SET FRAME 7.1. Parts checklist – Play Set (Cubby inside) From your 360 Pro Cubby House boxes: 4x Mat Frame Tubes 4x Mat Frame Corners 1x Top Joiner (two-way)
  • Page 18 4x Long Bolts 4x Short Bolts 4x Rubber 4x Pads 6x Anchors 24x Frame Bolts 1x Tool Set 1x Light 7.2. Assembly – Play Set (Cubby inside) STEP A. Insert two-way Top Joiners into both ends of a Cubby Rail, and then insert Cubby Rails into both ends of those two-way Top Joiners.
  • Page 19 Slide the Rail Joiners at the ends of your assembled Cubby House into the ends of the Swing (or Spin) Rails, on the both halves of your partly-assembled Swing Set. Ensure that you lock all parts together securely with Frame Bolts and Nuts. CONGRATULATIONS! You have assembled your Vuly 360 Pro Play Set! See your Swing instructions to attach your chosen Swings.

  • Page 20: Product Registration

    Vuly. and completing the form with a proof of purchase. Customers who purchase directly from Vuly (through VulyPlay. com, at the Vuly Showroom or over the phone) automatically have their product registered. 9.0. Half-price replacement parts Vuly offers half-price replacement parts to all customers for •...

  • Page 21: Inclusions

    10.4. Warranty Claims the product. This may include, but is not limited to: If a customer believes that a Vuly product is faulty or defective, Rusting or scratching of steel components, they must discontinue use and submit a Warranty Claim.

  • Page 22: Australian Consumer Law

    11.0. Missing parts If a customer believes that a Vuly product does not include Vuly products are delivered to Vuly warehouses prepackaged; all necessary parts, they must immediately lodge a Missing we are unable to check the boxes prior to delivery to ensure Parts Claim at VulyPlay.com/Support.
  • Page 24 vulyplay.com...

Table of Contents