Philips HQ5826/16 User Manual page 5

C
C
C
2
1
C
1
2
C
4 Clean the inside of the shaving unit and the
hair chamber with the brush.
5 Put the shaving unit back onto the shaver.
Every two months: shaving heads
1 Switch the appliance off, remove the mains
plug from the socket and disconnect the
appliance plug from the shaver.
2 Press the release button and remove the
shaving unit from the shaver.
3 Turn the wheel anticlockwise and remove
the retaining frame.
4 Remove and clean the shaving heads (cutter
and guard) one by one.
Do not mix up the cutters and the guards.
This is essential since each cutter has been ground
with its corresponding guard for optimal
performance.
ENGLISH
7