Windows Software - Kenwood TS-890S In-Depth Manual

09 Software
The conventional system, where the TS-890S is connected to the Internet via a PC (host PC) placed at the host station,
can also be selected. In this conventional system, the ARHP-890 (radio host program) and the ARVP-10 (VoIP software)
are required.
Refer to "TS-890S KENWOOD NETWORK COMMAND SYSTEM Setting Manual" which describes detailed information
on the configuration method for remote control.
The software for remotely controlling ARCP-890, etc. and "TS-890S KENWOOD NETWORK COMMAND SYSTEM
Setting Manual" can be downloaded from the following URL:
https://www.kenwood.com/i/products/info/amateur/software_download.html

Windows Software

This is a description of the Windows software used to control the TS-890S from a PC.
The following Windows software which can be used for the TS-890S is available:
Name
ARCP-890
ARHP-890
ARVP-10
ARUA-10
Virtual COM Port
Driver
66
This is software that controls the TS-890S from the PC.
This is the host program used on the host station PC to remotely control the TS-890S
through a network.
This is used with the ARCP-890.
(This is used when the internal TS-890S KNS server function is not used.)
This is the VoIP software to send TX/RX audio when the TS-890S is remotely controlled
through a network.
(There are two types of ARVP-10: the ARVP-10H and ARVP-10R.)
(This is used when the internal TS-890S VoIP is not used.)
This is software to substitute the microphone and speaker of the PC for a microphone and
speaker of the TS-890S when the connection is a USB connection. The output audio of the
TS-890S can sound from the PC speaker through the USB audio. Also, the audio input to the
PC microphone can be transmitted from the TS-890S through the USB audio.
(This software is not used when a user-made audio cable is connected from the ACC 2
connector.)
(This software is not used to remotely control through a network.)
This is software allowing you to use the ARCP-890 and ARHP-890 by installing the software
in the PC and connecting the TS-890S to a PC with a USB cable.
(This software is not used when a serial or LAN cable is connected.)
Description