Kenwood TS-890S In-Depth Manual page 72

09 Software
■ Controlling the TS‑890S from an Adjacently‑placed PC (with a
Microphone and Speaker Connected to the PC )
● Using the LAN connector
Signal Type
Software
Control
ARCP-890
signal
ARCP-890 and
Audio signal Windows sound
Note:
◆ Configure "On (LAN)" in "KNS Operation (LAN Connector)" of the TS-890S
● Using the USB connector
Signal Type
Software
Control Virtual COM port
signal driver and ARCP-890
ARUA-10 and
Audio signal Windows sound
Note:
◆ With these system configurations, the bandscope screen refreshes at a slower speed.
● Using the COM connector and ACC 2 connector
Signal
Type
Software
Control
ARCP-890
signal
Audio signal
Note:
◆ With these system configurations, the bandscope screen refreshes at a slower speed.
◆ When the ACC 2 connector is used for audio signal I/O, the ARUA-10 is not used.
68
PC
Hardware
Microphone and
speaker connected
driver to a PC
PC
Hardware
Microphone and
speaker connected
driver to a PC
PC
Hardware
Microphone and
speaker connected
-
to a PC
Connection
Method
-
LAN Cable
Connection
Method
USB cable
-
-
Connection
Method
RS-232C
-
cable
User-made
audio cable
TS‑890S
Hardware
Connect to the LAN connector.
TS‑890S
Hardware
Connect to the USB‑B connector.
-
TS‑890S
Hardware
Connect to the COM connector.
Connect to the ACC 2 connector.