Lan Connector - Kenwood TS-890S In-Depth Manual

10 terminal FUnCtiOnS

lan Connector

This connector is used for connection to a PC or LAN when operating using the KNS (KENWOOD NETWORK
COMMAND SYSTEM) or to enable automatic time correction using the NTP (Network Time Protocol) server.
It supports the 100BASE-TX and 10BASE-T LAN interface.
Internet
TS-890S
During KNS operation using the LAN connector, the current consumption value when power is OFF will vary according
to the settings based on the KNS operation style (whether it is remote operation within a LAN or over the Internet).
PC connection
by USB
None
Yes
78
Broadband Router
or Hub
Carrier and Service Provider
Ethernet Cable
（Straight Type）
Fig. 79 Example of LAN Connection
Table 9 Current when Power is OFF
Off
Approx. 4 mA
Approx. 105 mA
PC 1
ARCP-890 Radio Control
Program
PC 2
ARHP-890 Radio Host Program
KNS operation setting
On (LAN)
LAN MODE
Approx. 35 mA
Approx. 135 mA
On (Internet)
WAN MODE
Approx. 165 mA
Approx. 235 mA