Toro Multi Pro 5800-G Operator's Manual page 25

Mesh size—chemical or solution viscosity
1. Higher-viscosity chemicals
or solutions
2. Lower-viscosity chemicals
or solutions
When you spray at a higher application rate, consider
using a coarser optional suction-filter mesh; refer to
Figure 21.
Mesh size—application rate
1. Higher application rate
2. Lower application rate
Selecting a Pressure Filter
Available screen sizes include:
Standard Equipment: 50 mesh suction filter (blue)
Use the pressure filter table to identify the screen
mesh for the spray nozzles you are using based
on chemicals products or solutions with a viscosity
equivalent to water.
Figure 20
3. Screen mesh size
Figure 21
3. Screen mesh size
Pressure Filter Table
Spray Nozzle
Color Code (flow
rate)
As required for low
viscosity chemicals
or solutions or low
application rates
Yellow (0.2 gpm)
Red (0.4 gpm)
Brown (0.5 gpm)
Gray (0.6 gpm)
White (0.8 gpm)
g214212
Blue (1.0 gpm)
Green (1.5 gpm)
As required for high
viscosity chemicals
or solutions or high
application rates
As required for high
viscosity chemicals
or solutions or high
application rates
*The mesh size of the pressure filters in this table
are based on spray chemicals or solutions with the
Important:
When you spray with higher viscosity
(thicker) chemical products or solutions with
wettable powders, you may need to use a coarser
screen mesh for the optional pressure-filter; refer
to Figure 22.
g214214
Mesh size—chemical or solution viscosity
1. Higher-viscosity chemicals
or solutions
2. Lower-viscosity chemicals
or solutions
25
Screen Mesh Filter Color Code
Size*
100 Green
80 Yellow
50 Blue
50 Blue
50 Blue
50 Blue
50 Blue
50 Blue
30 Red
16 Brown
viscosity equivalent to water.
Figure 22
3. Screen mesh size
g214211