Care And Maintenance; Table Of Lubricants; Maintenance During The Running-In-Period - Hardi EVRARD ALPHA 2500 Operating And Maintenance Manual

This chapter describe operations maintanance on the machine. To keep the machine in good,
safe and reliable working order, as well as keeping the maintenance and repair costs to a mini-
mum it is essential to follow the preventive maintenance programme given hereafter.
5 - 1 T A B L E O F L U B R I C A N T S
Elements
DEUTZ Engine
Hydrostatic transmission
Hydraulic system
Pump step-up gear case
centrifugal pump
General lubrication
Coolant
5 - 2 M A I N T E N A N C E D U R I N G T H E RU N N I N G - I N - P E R I O D
Interval
After 1 h
After 2 h
After 10 h
After 50 h
After 250 h
(*) follow instructions given in the DEUTZ manual without fail.
M A I N T E N A N C E
5 - C A R E A N D M A I N T E N A N C E
6 cylindres
Equipments concerned
Tighten wheel bolts
Check that hydraulic circuit is oil tight.
Tighten wheel bolts.
Check engine for leaks. (*).
Change engine oil and Change engine oil filter (*).
Replace fuel filter (*)
Check belts (*).
Replace hydraulic circuit filters.
Change oil in hydraulic reservoir.
Check air conditioning
Drain water on fuel pre-filter
Capacity
15,5 l
60 l
1 l
15 l approx.
A A L P H A 2 5 0 0
Lubricant
Rubia 4400
API CG-4 API SG
ACEA E2/B2/A2-96
EQUIVIS ZS 46
AFNOR NF E 48-603 HV
ISO 6743/4 HV
TRANSMISSION TM
API GL5
MIL-L-2105 C,D
Multis EP2
ISO -L- XBCFB 2
ORGANICOOL
ASTM D 4985 - ASTM D 3306
677824
05/01
80W-90
SAE
5- 1
CHAPTER