John Louis Home JLH-525 Assembly Instructions Manual page 8

4. Center the top screw hole of the shelf mounting L-clip hardware with the
level line & mark all hole locations.
5. Secure L-clip to wall using #8 1 1/2 in. screws at hole locations (Use wall
anchors provided if no stud is present).
6. Repeat for all L-clips at shelf height location.
7. Double check required shelf measurement at shelf height location.
8. Measure, mark & cut required shelf dimensions.
9. Place shelf end hardware onto shelf end at side wall location.
10. Place shelf onto shelf mounting hardware.
11. Level shelf.
12. Mark a level line on the side wall at the bottom and side of hardware.
13. Place shelf end hardware onto shelf end at tower location.
14. Level shelf.
15. Mark a level line on the tower side at the bottom and side of hardware.
7
16. Remove shelf & place shelf end hardware at lines and mark screw hole
locations.
17. Secure shelf end hardware to wall using #8 1 1/2 in. screws. Use supplied
wall anchor at marked location if no stud is present.
18. Secure shelf end hardware to tower side using #6 3/4 in. screws.
19. Place shelf into shelf end hardware & onto L-clip hardware.
20. Secure shelf to hardware using #4 3/4 in. screws at all hardware locations.