John Louis Home JLH-525 Assembly Instructions Manual page 4

IMPORTANT - Read Before Assembly
12 in. deep Premier Organizer and 16 in. deep Deluxe Organizer
use the same assembly instruction process EXCEPT DURING
THE J-HOOK PLACEMENT ON THE ANGLE BRACKET.
Assembly instructions are written for 8 ft. configuration A.
All assembly processes are the same for each configuration
EXCEPT for the order or locations of the assembly process.
Use selected configuration for shelf locations.
Shelf lengths and Garment bars may need to be cut depending upon configuration
desired.
All cut shelf lengths are used in closet configurations supplied. Depending upon
your closet dimensions, some cut lengths may not be usable.
If you choose an 8 ft. closet configuration and the width of your
EXAMPLE:
closet is 8 ft. 4 in., the cut shelf length will be short 4 in. for use. It is recommended
that if your closet is over the selected dimension (8 ft.), then choose a configura-
tion from the next dimension higher (10 ft.).
If you choose an 8 ft. closet configuration and the width of your
EXAMPLE:
closet is 7 ft. 6 in., some shelf lengths may need to be cut 6 in. shorter in length
to fit closet dimensions.
VERIFY SHELF MEASUREMENTS
MEASURE - MARK - MEASURE AGAIN
Chosen configuration may not require use of all hardware or components sup-
plied.
It is recommended to secure hardware into wall studs for overall strength and
stability of closet system.
If choosing a custom designed configuration, modifications to the instructions pro-
vided will be necessary.
All configurations provided may be reversed.
STEP 1 - Determining Your Dimensions
1. Locate your desired configuration (Instructions are written for 8 ft.
configuration A).
2. Top hang shelf is created with 1 - 6 ft. shelf length.
3. Double hang is created by cutting a 4 ft. shelf to 45.5 in. wide.
Long hang is created by cutting a 6 ft. shelf to 24 in. wide. (If your closet
4.
is greater or less than 8 ft. wide you will cut your shelf greater or
less that distance. EXAMPLE: Closet is 8 ft. 5 in. - cut shelf 2 ft. 5 in.
EXAMPLE: Closet is 7 ft. 10 in. - cut shelf 1 ft. 8 in.)
3
STEP 2 - Marking Measurements On Wall
1. Locate the 3 main shelf height locations for your configuration.
2. Measure up from the floor & mark the 84 in. location.
3. Measure down 42 in. from the 84 in. mark & mark the 42 in. location.
4. Measure down 12 in. from the 84 in. mark & mark the 72 in. location.
5. Draw a 6 ft. long level line out from wall end at 84 in. location.
6. Draw a 4 ft. long level line out from wall end at 42 in. location.
7. Draw a 2 ft. long level line out from wall end at 72 in. location.
8. Locate stud locations at level lines.
84 in. - top shelf
42 in. - double hang shelf
72 in. - long hang shelf