Cleaning And Maintenance - Remington POWER F2 SERIES Manual

CLEANING & MAINTENANCE
Note: When cleaning your shaver, make sure the shaver is turned off and
disconnected from the power cord.
Caution:
Cleaning Your Shaver
To ensure long lasting performance, it is important to clean your shaver
regularly. We recommend you clean your shaver after each use. The easiest
and most hygienic way to clean the shaver is by rinsing the shaver head
after use with warm water.
Weekly Cleaning
I
Clean under the assembly at least once a week:
1.
Turn the shaver off.
2.
Remove the head assembly from the shaver body (Diagram I).
3.
Gently tap the shaver head on a flat surface to remove any loose hair
particles, and rinse the shaver head under warm water (Diagram J).
Never submerge your shaver under water.
4.
Thoroughly clean the cutter and trimmer with a brush (Diagram J).
5.
Never use the cleaning brush on the foils, as damage may occur.
6.
Shake off any excess water.
7.
Leave the shave unit open to allow the shaver to dry completely.
8.
Lubricate the shaver with a spray of Remington
on the foil and cutters.
9.
Replace the head assembly, simply by pushing it on the shaver.
Note: Cover shaver head with the head guard between uses. When
removing the head guard or placing it back onto the shaver, do not apply
pressure to the floating cutter surfaces, as you may damage them.
J
8
Shaver Saver (SP4)
®