Remington POWER F2 SERIES Manual page 5

F2000AU SPECIFICATIONS
Power System
Initial Charge Time
Full Charge Time
Cordless Shave Time
Indicators
Voltage Type
Replacement Head & Cutters
Power System: Cordless – shaver can only be used without the power
cord.
Indicator: Charging – green light that glows when the shaver is being
charged.
Voltage Type: Worldwide Voltage – shaver automatically adapts to an
outlet voltage between 100V and 240V.
Note: Some countries will require the use of a plug adaptor that is not
included with your shaver.
CHARGING
A
Before using, read the important safety instructions in this manual.
1.
Ensure the product is switched off. Connect the shaver to the adaptor
(Diagram A).
2. Connect to the mains (Diagram B) and charge for at least 24 hours
when using for the first time (Diagram C). This first charge is important
to the shaver's battery life.
3.
When plugged, the charging indicator will light up.
4.
When empty, the battery should be charged for 16 hours and will
provide 40 minutes of shaving time.
5.
To preserve the life of the batteries, allow them to fully discharge
every six months, and then recharge them for 24 hours
B
Cordless (Rechargeable)
24 Hours
16 Hours
40 Minutes
LED
Worldwide
SPF-F2000AU
C
5