Do you have a question about the F5800 and is the answer not in the manual?
Questions and answers
Steven Noble
February 12, 2025
How do I remove the swivel top of my shaver? I need to clean the inside two spring brushes. I can’t find a model # but when I release the side sideburns latch on the top side it says F5800
1 comments:
Mr. Anderson
February 12, 2025
To remove the swivel top of the Remington F5800 shaver for cleaning, follow these steps:
1. Ensure the shaver is switched off and unplugged from the mains outlet. 2. Pull the foil assembly up to remove it from the hair pocket. 3. Do not use a brush to clean the foils; instead, blow out the shavings or rinse the foils under cold or warm water. 4. After cleaning, replace the head assembly.
Thank you for choosing Remington®. Our products are designed to meet the highest standard of quality, functionality and design. We hope you enjoy using your new Remington® product. Please read the instructions for use carefully and keep in a safe place for future reference.
Page 3
• The shaver adapts automatically to a mains voltage between 100V and 240V. C DRY CLEANING • Ensure the shaver is switched off and unplugged from the mains outlet. C CORDED USE • Pull the foil assembly up to remove from hair pocket. • Thoroughly blow out the stubble from the foils and cutters. • Connect the shaver to the adaptor, then to the mains and recharge for 5 minutes • Tap out excess hair shavings and use a cleaning brush if necessary. before using. • Do not clean the shaving foil with a brush. A CAUTION • Replace head assembly. Extended mains only use will result in the reduction of the battery life. C WASHABLE CLEANING F HOW TO USE • Ensure the shaver is switched off and unplugged from the mains outlet.
Note: DO NOT press on the cutter ends as this may cause damage. WIRING INSTRUCTIONS UK PLUGS ONLY Rotary heads replacement model: SPF-300 The product doesn’t need an earth. Replacement parts and accessories available to buy at http://www.remington.co.uk/ It has a 13A BS1362 fuse in a 13A BS1363 plug. parts-accessories. T o replace the plug, fit the blue wire to N, and the brown wire to L. Fit the cord grip. F IMPORTANT SAFETY INSTRUCTIONS If in doubt, call an electrician. WARNING – TO REDICE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR INJURY TO D on’t use a non-rewireable/moulded plug...
SERVICE HOTLINE This does not mean an extension of the guarantee period. I n the case of a guarantee simply call the Service Centre in your region. T his guarantee is offered over and above your normal statutory rights. UNITED KINGDOM T he guarantee shall apply in all countries in which our product was sold via an authorised G +44 0800 212 438 (free call) dealer. This guarantee does not include damage to the product by accident or misuse, abuse, Customer Service alteration to the product or use inconsistent with the technical and/or safety instructions Spectrum Brands (UK) Ltd required.
Need help?
Do you have a question about the F5800 and is the answer not in the manual?
Questions and answers
How do I remove the swivel top of my shaver? I need to clean the inside two spring brushes. I can’t find a model # but when I release the side sideburns latch on the top side it says F5800
To remove the swivel top of the Remington F5800 shaver for cleaning, follow these steps:
1. Ensure the shaver is switched off and unplugged from the mains outlet.
2. Pull the foil assembly up to remove it from the hair pocket.
3. Do not use a brush to clean the foils; instead, blow out the shavings or rinse the foils under cold or warm water.
4. After cleaning, replace the head assembly.
Do not submerge the shaver completely in water.
This answer is automatically generated