Getting Started - Remington POWER F2 SERIES Manual

Caution:
• Make sure the shaver and your hands are dry when charging the
shaver.
• Always charge the shaver in a cool, dry place.

GETTING STARTED

Before operating your shaver, remove the protective head guard, which
protects the foils and cutter assembly. It is important to remove it correctly
to avoid damaging the clips that hold it to the shaver.
1. Press lightly on the top of the protective head guard.
2.
Lift the lower rear edge.
3.
Pull the protective head guard away from the shaver.
When the shaver is not in use, always keep the protective head guard on
the shaver head and keep the trimmer in the OFF position.
SHAVING
D
1.
Remove power adaptor from the shaver (Diagram A).
2. Press the power button to the ON position to activate the shaver for
shaving.
3.
Use your free hand to stretch your skin so that the hairs stand upright.
This encourages your facial hair to stand out, making it easier for them
to enter the foil (Diagram D).
4.
Hold the shaver so that the foils touch your face (Diagram E). Ensure
that you hold the shaver at an angle where both foils are touching the
skin. This allows the shaver to work the way it was designed for the
closest shave with minimum wear.
5.
After shaving turn the shaver off.
E
6