Remington POWER F2 SERIES Manual page 12

Lubricate
Remington Shaver Saver (SP-4) lubricates, cleans and protects your
®
shaver's foil and cutter assembly. The lubricant helps remove hair clippings
while reducing wear. Spray on the foil and cutters after each shave to keep
your shaver operating at peak performance.
REPLACING THE FOIL & CUTTERS
It is very important to replace the foil and cutters when necessary to
ensure a close, comfortable shave without irritation. We recommend they
be replaced every 6 months. Here are some signs of head and cutter wear,
indicating that replacement is needed:
Irritation: As the heads get excessively worn you may experience
•
some skin irritation. This would be especially noticeable when you
apply moisturizing lotion.
Pulling: When the cutters wear you may feel a sense of pulling and a
•
loss of closeness when you shave. This is an indication that it is time
to replace your heads and cutters.
Replacement foil & cutters may be obtained from your local retailer, or
directly from Remington
- refer to pages 9 & 10, or alternatively your order can be processed over
the phone via the Remington
. Simply fill out the enclosed accessory order form
®
Service Hotline.
®
12