Cleaning And Maintenance - Remington Style Series Manual

TRIMMING
• Slide up the trimmer release button to activate the trimmer.
• Hold the trimmer at a right angle to your skin.
• To retract the trimmer, push the top rear of the trimmer down until it locks under
the trimmer release button.
STUBBLE LOOK
Fit the stubble head guard to your shaver for a 3-day stubble look.
TIPS FOR BEST RESULTS
• Always hold the shaver at right angles to the skin so that all foils are touching the
skin with equal pressure.
• Use moderate to slow stroking movements. The use of short linear motions in
stubborn areas may obtain a closer shave, especially along the neck and chin line.
• DO NOT press hard against the skin in order to avoid irritation and damage to the
foil heads.

CLEANING AND MAINTENANCE

Care for your appliance to ensure a long lasting performance. We recommend you clean
your appliance after each use.
The easiest and most hygienic way to clean the appliance is by rinsing the appliance
head after use with warm water.
1. Remove the shaver head (pull the head up and off FIG A).
2. Tap out the excess hair shavings and rinse the foils under running water (Fig B, C).
3. Do not clean the shaving foil with a brush.
4. Replace the head assembly by placing the assembly on top of the hair pocket, press
down and click into place.
• Lubricate the teeth of the trimmer every six months with a drop of sewing machine
oil.
REPLACING THE FOILS AND CUTTERS
• To ensure continued high quality performance from your shaver, we recommend
the foils and cutters are replaced regularly.
SIGNS THAT YOUR FOIL/S AND CUTTER/S NEED REPLACING:
• Irritation: as foils get worn, you may experience skin irritation.
• Pulling: as the cutters wear, your shave may not feel as close and you may feel the
cutter pulling your hair.
• Wear through: you may notice that the cutters have worn through the foils.
5