progressive automations TY-01 User Manual page 7

Assembly Instructions
Secure another 2 parts of the TV mounting bracket onto the
5
backside of the TV set with 4 screws included with TV set. And
then hang the TV set onto the TV mounting bracket as
following.
Use 2 M5x50 screws to tighten on the bottom.
Connect the wires as per the diagram below. A Reset
6
procedure is required before use.
Operating: You can use the wireless remote or handset to
7
operate the TV lift.
(1) Remote: Press the UP button to move the TV lift move up,
press the DOWN button to move the TV lift move down.
(2) Handset: Press UP button, TV lift move up, press DOWN
button, TV lift move down. (3) During the movement, you can
press any button on remote or handset (not the RESET button
on handset), TV lift stop at once.
8
Setting the UPPER and LOWER limits:
• To set the UPPER limit position:
Hold UP and RESET for 3 seconds, release both buttons to
stop the rising column at the preferred position. The upper-limit
position is now set.
• To set the LOWER limit position:
Hold the DOWN and RESET for 3 seconds, release both
buttons to stop the descending column at the preferred lower
limit position. The lower-limit position is now set.
• The upper and lower limit set have power down memory, which
means this setting will be saved even if power is removed from
the control box.
7