Bartscher 200240 Manual page 7

HOT SURFACE! Risk of burns!
To avoid the hazard results please follow the safety instructions
below.

During the operation the housing of the device becomes very hot.
Do not touch it with bare hands.

After the device has been switched off it remains hot for some
time. Before cleaning the device, shifting or moving it
elsewhere, wait for the device to cool down sufficiently.

Never move the device during work.
WARNING! Risk of burns or scalds!
To avoid the hazard please follow the safety instructions below:

Check if any liquids flow from the device during its operation!
Do not overfill the basin.

Before draining the water from the basin, always leave the water
to cool down.

When changing the GN containers or manoeuvring in the area
of the heated water bath the hot surfaces or hot steam may
cause burns to hands and arms. Always use protective gloves!

Never grasp the container during operation or when the device
is on. Make sure beforehand that the device is disconnected
from the power supply (unplugged) and the water in the basin is
cold. Check the water by holding your hand 2 to 5 cm above the
container.
- 24 -