Roland VersaEXPRESS RF-640 Manual page 10

Switching the Ink

Clean the locations shown in the following figure.
Exercise special care in cleaning off any accumulated ink. You can make the accumulated ink easier to clean off by ap-
plying cleaning liquid to cleaning locations
 Also carefully clean the sides of the print heads.
 During this work, be careful not to touch the print head
surface (nozzle surface) directly with the cleaning stick.

Press

10
ECO-SOL MAX 3 Ink Switching Method
Area to clean
.
When the screen shown in the figure appears, attach the right cover.
You will open the cover again later in the procedure, so there is no need to fix the
cover in place with screws.
When the screen shown in the figure appears, the cleaning of the periphery of the
print heads (manual cleaning) is finished. Proceed to the next procedure.
and , and then wiping these locations off with the cleaning stick.