Roland VersaEXPRESS RF-640 Manual page 16

Switching the Ink


If there are multiple printers that have been switched to MAX 3 ink, click
Repeat steps

Click [OK].
This completes the operations to switch to MAX 3 ink.
When a printer that does not use MAX 3 ink is connected to VersaWorks
2.
Temporarily delete the printer that has been switched to MAX 3 ink from VersaWorks.

Start VersaWorks.



16
ECO-SOL MAX 3 Ink Switching Method
   
, , , and to reconnect to these printers that have been switched to MAX 3 ink.
Click [Apply].
The printer that has been switched to MAX 3 ink is
displayed under [Printer List].
.
When the screen shown in the figure is
displayed, click [OK].
The [Printer Settings] screen will appear.
Select a printer that has been switched to
MAX 3 ink under [Printer List], and then
click .
When the screen shown in the figure ap-
pears, confirm that you want to delete the
selected printer, and then click [Yes].
The selected printer is deleted from the [Printer
List].