Roland VersaEXPRESS RF-640 Manual page 17

3.
Reconnect a printer that has been switched to MAX 3 ink to VersaWorks.

Click .

Set [IP Address] to the IP address of the printer that was temporarily deleted (the printer that has
been switched to MAX 3 ink).

Click [Verify].



If there are multiple printers that have been switched to MAX 3 ink, click
 
Repeat steps ,

Click [OK].
 
, , and to reconnect to these printers that have been switched to MAX 3 ink.
Check that [Ink Type] is the MAX 3 ink.
This indicates that you have successfully reconnect-
ed to a printer that has been switched to MAX 3 ink.
Click [Apply].
The printer that has been switched to MAX 3 ink is
displayed under [Printer List].
.
ECO-SOL MAX 3 Ink Switching Method
Switching the Ink
17