Roland VersaEXPRESS RF-640 Manual page 12

Switching the Ink

Press

2.
Replace the felt wiper.


Detach the old felt wiper.



Press
12
ECO-SOL MAX 3 Ink Switching Method
.
When the screen shown in the figure appears, attach the right cover.
You will open the cover again later in the procedure, so there is no need to fix the
cover in place with screws.
When the screen shown in the figure appears, remove the right cover.
Preparations are complete when this screen appears.
.
Insert a new felt wiper.
Attach the part to the hooks.
Be sure to attach the part to the hooks. Failure to do so may result
in dot drop-out or other problems.