Roland VersaEXPRESS RF-640 Manual page 15


3.
Reconnect a printer that has been switched to MAX 3 ink to VersaWorks.

Start VersaWorks.
The [Printer Settings] screen will appear.

Set [IP Address] to the IP address of the printer that has been switched to MAX 3 ink.

Click [Verify].

When the screen shown in the figure is
displayed, click [Yes].
Check that [Ink Type] is the MAX 3 ink.
This indicates that you have successfully reconnect-
ed to a printer that has been switched to MAX 3 ink.
ECO-SOL MAX 3 Ink Switching Method
Switching the Ink
15