Roland VersaEXPRESS RF-640 Manual page 13

3.
Finish the replacement work.






Close the front cover.
When the screen shown in the figure appears, attach the left cover.
You will open the cover again later in the procedure, so there is no need to fix the
cover in place with screws.
When the screen shown in the figure appears, attach the right cover.
Screws
Right
cover
Hook
When the screen shown in the figure appears, remove the left cover.
Attach the cut rail.
Press
Screw
When the screen shown in the figure appears, attach the left cover.
The screen shown in the figure appears, and then cleaning starts.
When this screen appears, the "Replacing the Wiper and Felt Wiper" step is finished.
Proceed to the next procedure.
.
Cut rail
ECO-SOL MAX 3 Ink Switching Method
Switching the Ink
13