Pioneer AVIC-505 Service Manual page 94

AVIC-505
9. RGB
Checks RGB bridge.
RGB is displayed in the following pattern:
R0(H), R1(L), R2(H), R3(L), R4(H), R5(L)
R0(L), R1(H), R2(L), R3(H), R4(L), R5(H)
(A total of six screens)
Use the → and ← keys to switch between them.
- Other screens
The screens shown below can be entered from the menu screen.
1. GPS Sensitivity
· Press the OK key to GPS Sensitivity.
· The BACK key returns you to the menu screen.
2. GPS Status
· Press the OK key to GPS Status.
· The BACK key returns you to the menu screen.
3. Wave Play
· Press the OK key to Wave Play.
· The volume (0dB - 48.5dB) is shown in the bottom left corner of the screen. The volume can be adjusted using
the → and ← keys.
· The BACK key returns you to the menu screen.
4. File Maintenance
· It is possible to do file copies, deletion and file dumps. Refer to Help for details of how to use each of these
functions.
5. Display Check
1. Plane: Use the → and ← keys to display white, yellow, light blue, green, purple, red, and blue
2. Color Bar: from left, white, yellow, light blue, green, purple, red, blue
3. Cross Hatch
4. Sweep
5. Step
6. Ramp
7. Window
8. Mono Scope
9. Cycle Line(Longways)
10. Cycle Line(Crosswise)
11. Longitudinal Stripe
12. Sideways Stripe
13. Chinese Character
14. Map
15. Picture(Nature)
16. Picture(Figure1)
17. Picture(Figure2)
6. Japanese/English
94