Diagnosis; Disassembly - Pioneer AVIC-505 Service Manual

AVIC-505

7.2 DIAGNOSIS

7.2.1 DISASSEMBLY

- Items to note concerning assembly
1. Do not re-use spacers, insulators, seals or cushions
that have been held in place by double-sided tape.
2. The diagonal line on the claws in the diagram
indicate solder. When assembling, solder these
sections.
- Removing the Upper Case and Grille Assy Unit
(CC Unit section)
1. Remove the two screws A.
2. Remove the cover.
3. Remove the eight screws B.
4. Remove the Upper Case.
5. Remove the two stoppers indicated by the arrows
and remove the Grille Assy Unit.
- Removing the Grille PCB (CC Unit section)
1. Remove the five stoppers indicated by the arrows
and remove the Grille PCB.
- Removing the Main Unit section (CC Unit
section)
1. Remove the two connectors.
2. Straighten the four claws and remove the Main Unit
section.
86
B
B
Grille Assy Unit
Grille PCB
A
Upper Case
Cover
B
B
B
B
Main Unit section
A
B
B