Pioneer AVIC-505 Service Manual page 91

8. Switch disp. mode [Error message]
· If an error occurs, the screen will change to display this to the user
· When error information is selected, it is possible to determine the point at which the error occurred.
The following information is displayed:
· ERCD (or else ercd) = error code
· FILE (or else inf) = program name in which error occurred
· LINE (or else type) = line number in which error occurred
· VERS = program with error version number
· DATE = program with error creation date
· TIME = program with error creation time
· AUTH = program with error program creator
· ERROR-TIME = date and time of error occurrence
· It is necessary to reset this item once more to return to initialization set-up. The RESET key has no effect.
· Press the ON/OFF button on the remote control to complete the procedure.
9. Debug shell
· For factory use only.
10. Clear SRAM for sensor
AVIC-505
91