Serial Port 1 Configuration - Nexcom EBC 357X Series User Manual

Chapter 3: BIOS Setup
IT8786 Super IO Configuration
This section is used to configure serial ports 1 to 5 of the super IO.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
IT8786 Super IO Configuration
Super IO Chip IT8786

Serial Port 1 Configuration


Serial Port 2 Configuration

Serial Port 3 Configuration

Serial Port 4 Configuration

Serial Port 5 Configuration

Version 2.18.1260. Copyright (C) 2016 American Megatrends, Inc.
Super IO Chip
Displays the Super I/O chip used on the board.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Serial Port 1 Configuration
This section is used to configure serial port 1.
Set Parameters of Serial Port
1 (COMA)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
33
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Change Settings [IO=3F8h; IRQ=4;]
Version 2.18.1260. Copyright (C) 2016 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
EBC 357X User Manual