Nexcom EBC 357X Series User Manual page 57

Chapter 3: BIOS Setup
System Component
This section is used to configure system component settings.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
CRID Setting [Disable]
PMIC ACPI OBJECT [Disable]
PNP Setting [Power&Performance]
OS Reset Select [Cold Reset]
Embedded Power Instrumentation [Disable]
USB TypeC [Disable]
PS2 Keyboard and Mouse [Auto]
Spread Spectrum Clocking Configuration
DDR SSC [Enable]
DDR SSC Selection Table [-0.5%]
DDR Clock Bending Selection Table [0% (No Clock Bending)]
HighSpeed SerialIO SSC [Enable]
HighSpeed SerialIO SSC Selection T [-0.5%]
Version 2.18.1260. Copyright (C) 2016 American Megatrends, Inc.
CRID Setting
Configures the Revision ID reflected in PCI config space.
PMIC ACPI OBJECT
Enables or disables PMIC ACPI device.
PNP Setting
Configures the mode of PnP. The options are Disable, Performance, Power
and Power & Performance.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
OS Reset Select
Configures the OS reset type. The options are Warm Reset and Cold Reset.
Embedded Power Instrumentation
Enables or disables the EPI feature.
Select the Revision ID
reflected in PCI config space USB TypeC
Enables or disables USB Type-C.
PS2 Keyboard and Mouse
Enables or disables PS2 keyboard and mouse.
DDR SSC
Enables or disables DDR Spread Spectrum Clocking configuration.
→←: Select Screen
↑↓: Select Item
Enter: Select
DDR SSC Selection Table
+/-: Change Opt.
F1: General Help
Configures the SSC setting for DDR Spread Spectrum.
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
DDR Clock Bending Selection Table
Configures the clock bending setting for DDR Spread Spectrum.
HighSpeed SerialIO SSC
Enables or disables high speed serial IO Spread Spectrum Clocking
configuration.
HighSpeed SerialIO SSC Selection Table
Configures the SSC setting for high speed serial IO Spread Spectrum.
43
EBC 357X User Manual