Nexcom EBC 357X Series User Manual page 65

Chapter 3: BIOS Setup
Uncore Configuration Cont.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
IGD Configuration
Integrated Graphics Device [Enable]
Primary Display [IGD]
RC6(Render Standby) [Enable]
GTT Size [8MB]
Aperture Size [256MB]
DVMT Pre-Allocated [64M]
DVMT Total Gfx Mem [256M]
Cd Clock Frequency [624 MHz]
GT PM Support [Enable]
PAVP Enable [Enable]
IGD - LCD Control
BIA [Auto]
ALS Support [Enable]
IGD Flat Panel [Auto]
IGD Boot Type [Auto]
Panel Scaling [Auto]
GMCH BLC Control [PWM-Inverted]
Memory Configuration
Memory Scrambler [Disable]
IPU PCI Device Configuration
Version 2.18.1260. Copyright (C) 2016 American Megatrends, Inc.
Integrated Graphics Device
Enables or disables the integrated graphics device (IGD).
Primary Display
Configures which IGD/PCI graphics device is used as the primary display.
RC6 (Render Standby)
Enables or disables render standby support. RC6 should be enabled if S0ix is
enabled. This item will be read only if S0ix is enabled.
GTT Size
Configures the GTT size.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
▲
Enable/Disable Memory
Scrambler support.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
▼
51
Aperture Size
Configures the aperture size.
DVMT Pre-Allocated
Configures the DVMT 5.0 pre-allocated (fixed) graphics memory size used
by the internal graphics device.
DVMT Total Gfx Mem
Configures the DVMT5.0 Total Graphic Memory size used by the internal
graphics device.
Cd Clock Frequency
Configures the highest Cd clock frequency supported by the platform.
GT PM Support
Enables or disables GT PM support.
PAVP Enable
Enables or disables PAVP.
BIA
Configures the BIA level. The options are Auto, Disabled and Level 1 to Level 5.
ALS Support
Enables or disables ALS support. Only valid for ACPI.
IGD Flat Panel
Configures the resolution of the IGD flat panel.
IGD Boot Type
Configures the display interface to use for the integrated graphics device
when system boots.
EBC 357X User Manual