Nexcom EBC 357X Series User Manual page 62

Chapter 3: BIOS Setup
RTD3 Settings
This section is used to configure RTD3 settings.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
RTD3 Support [Enabled]
Consolidated Power Resource [Disabled]
VR Staggering delay 16
VR Ramp up delay 16
PCIE Slot 5 Device Power-on delay 100
PCIE Slot 5 Device Power-off delay 10
Audio Delay 200
I2C0 Controller 0
SensorHub 68
I2C1 Controller 0
TouchPad 68
TouchPanel 68
P-state Capping [Disabled]
USB Port 1 [Disabled]
USB Port 2 [Disabled]
I2C0 Sensor Hub [Enabled]
ZPODD [Disabled]
USB Camera [Disabled]
Sata Port 1 [Disabled]
Sata Port 2 [Disabled]
MiniCard SATA Port3 [3.3DX MiniCard]
Version 2.18.1260. Copyright (C) 2016 American Megatrends, Inc.
RTD3 Support
Enables or disables runtime D3 support.
Consolidated Power Resource
Enables or disables 1 power resource for all power gated devices except the
network device. Use this for Modern Standby test.
P-state Capping
Enables or disables _PPC and the sending of ACPI notification.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
USB Port 1 and USB Port 2
Configures the speed of USB ports 1 and 2.
I2C0 Sensor Hub
Enables or disables RTD3 support for I2C0 sensor hub.
Enable/Disable Runtime D3
ZPODD
support
Enables or disables Zero Power ODD option. Only applicable for
WhiteTipMountain1 and AdenHills with ZPODD feature rework.
USB Camera
Enables or disables USB Camera option. Only applicable for
WhiteTipMountain1, AdenHills and Sawtoothpeak with USB feature
rework.
→←: Select Screen
↑↓: Select Item
SATA Port 1 and SATA Port 2
Enter: Select
+/-: Change Opt.
Enables or disables the control of RTD3 functionality of SATA ports 1 and 2.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
MiniCard SATA Port3
ESC: Exit
Configures the MiniCard type for SATA port 3.
48
EBC 357X User Manual