Nexcom EBC 357X Series User Manual page 59

Chapter 3: BIOS Setup
TDO GPIO Pin
Enables or disables TDO GPIO Pin. If Auto is selected, TDO will be disabled
for A0 silicon only. For other steppings, TDO will be enabled.
Max Memory 2G
Enables or disables 2GB maximum memory support.
Persistent RAM Size
Configures the amount of main memory to be reserved for PRAM. The
memory will be allocated right after MRC initialization and its location will
be stored into ACPI table.
OS DnX Focus Entry
Enables or disables OS DnX focus entry.
ISH GPIO(I2C0) Pull Up
Enables or disables ISH GPIO I2C0 pull up.
ISH GPIO(I2C1) Pull Up
Enables or disables ISH GPIO I2C1 pull up.
Processor Trace Memory Allocation
Configures the processor trace memory region size from 4KB to 128MB.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
NPK Debug Configuration
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
North Peak Enable
FW Trace Enable
FW Trace Destination
NPK Recovery Dump
Memory Region 0 Buffer Size
Memory Region 0 Buffer WrapAround
Memory Region 1 Buffer Size
Memory Region 1 Buffer WrapAround
PTI Mode
PTI Training
PTI Speed
Punit Message Level
PMC Message Level
Version 2.18.1260. Copyright (C) 2016 American Megatrends, Inc.
North Peak Enable
Enables or disables north peak function.
FW Trace Enable
Enables or disables FW trace function.
FW Trace Destination
Configures the destination of FW trace.
NPK Recovery DUMP
Enables or disables the NPK recovery dump feature.
45
[Auto]
North Peak Function Enable
[Enable]
[PTI ]
[Disable]
[None]
[Wrap ]
[None]
[Wrap ]
[X4 ]
[Off ]
[Quarter Speed ]
[LEVEL LOW ]
[LEVEL LOW ]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
EBC 357X User Manual