Operating Temperature - Zibro S1234 Operating Manual

FUNCTION INDICATORS ON INDOOR UNIT DISPLAY PANEL
Signal receptor
AUTO indicator
This indicator illuminates when the air conditioner is in AUTO operation.
DEFROST indicator (For Cooling & Heating models only)
This indicator illuminates when the air conditioner starts defrosting automatically or when the warm
air control feature is activated in heating operation.
TEMPERATURE indicator
Displays the temperature settings when the air conditioner is operational.
OPERATION indicator
This indicator flashes after power is on and illuminates when the unit is in operation.
TIMER indicator
This indicator illuminates when TIMER is set ON/OFF.
C

OPERATING TEMPERATURE

Cooling, heating and dehumidifying are most effective at the following indoor and outdoor temperatures:
Temperature
Room temperature
Outdoor temperature
CAUTION
• If air conditioner is used outside of the above conditions, certain safety protection features may
come into operation and cause the unit to function abnormally.
• Room relative humidity less than 80%. If the air conditioner operates in excess of a relative
humidity of 80% in the room, the surface of the air conditioner may attract condensation.
Please set the vertical air flow louver to its maximum angle (vertically to the floor), and set HIGH
fan mode.
• For maximum effect of your air conditioner always close doors and windows when cooling or
heating.
4
106
Mode Cooling operation
17ºC - 32ºC
18ºC - 40ºC
Heating operation Dehumidifying operation
10ºC - 27ºC
10ºC - 24ºC
17ºC - 32ºC
18ºC - 40ºC