Play With Bluetooth Device; Pair The Bluetooth-Enabled Devices; Adjust Microphone Position - Philips CED750/51 User Manual

6 Play with
Bluetooth
device
You can make or receive phone calls with
Bluetooth-enabled phones through the unit.
You can also listen to music from a Bluetooth-
enabled device.
Pair the Bluetooth-enabled
devices
The fi rst you connect your Buetooth device to
the unit, you need to pair the device to the unit.
Pairing needs only to be done once. You can
pair up to eight devices.
Note
•
The operational range between this unit and a
Bluetooth device is approximately 10 meters
(30 feet).
•
Before you connect a Bluetooth device to this
unit, familiarize yourself with the Bluetooth
capabilities of the device.
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
Any obstacle between this unit and a
Bluetooth device can reduce the operational
range.
•
Keep this unit away from any other electronic
device that may cause interference.
1
Turn on the Bluetooth function on the
device.
2
Setup the Bluetooth function on your
device.
3
Select "CED750" in the pairing list.
4
Enter default password "0000".
»
iI pairing succeeds.
displayed on the panel.
28 EN
[Connect] is
Disconnect Bluetooth devices
1
To disconnect one device, touch
[Disconnected].
» [Connect] is displayed.
Tip
•
The device will also be disconnected when the
device is moved beyond the operational range.
•
If you want to reconnect the device to the
unit, place it within the operational range.
•
If you do not want to reconnect the device to
the unit automatically, touch [Settings] > [Auto
connect], then select [Off]. For details, see the
"Adjust Bluetooth settings" section.
Tip
•
If the paired device is moved beyond the
operational range, when it is brought back,
please check if the device is still connected
with the system:
•
. If they are connected,
is displayed.
• . If connection is lost,
displayed. Follow the instruction above to pair
the device with the system again.

Adjust microphone position

For better sound quality in make/receive phone
call through Bluetooth, place the microphone at
a location close to mouth.
1
Make sure the supplied microphone is
connected to the car audio system. (See
"Connect wires" section).
2
Place the microphone at a proper
location. For example,
• Sticked it onto the dashboard.
[Disconnect] (red icon)
[Connect] (green icon) is