Philips CED780 Quick Start Manual

Register your product and get support at
EN Quick start guide
ZH-HK
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
CED780_QSG_98_V1.0
All manuals and user guides at all-guides.com
a
CED780
b
c
d
A
B
22
21
20
8
9 0!" $ &
1
5 7
6
2
3
4
53mm
What's in the box
Main unit and front Remote control
panel (with a sleeve)
ISO standard Audio and
connector Video cable
A B
Connect wires
Connector
1 Yellow wire
2 Blue/White wire
3 Black wire
4 Red wire
5 Green and green/
black wires
6 White and white/
black wires
7 Gray and gray/
black wires
8 Purple and
purple/black
wires
Connector/Object
1 Pink wire
2 Extension wire (not included) Parking brake (-)
3 Brake switch
4 Ground
5 Purple wire
6 Gearbox switch
7 Reverse gear signal
8 ISO wires
9 Yellow cable
10 Red cable
11 White cable
12 Red cable
13 White cable
14 Red cable
15 White cable
§ % /
16 Yellow cable
18
17 Brown cable
19
18 Blue cable
19 White wire
20 Black wire
21 Black wire
22 Black wire
Á Quick start guide
Turn on
1
Press
» The available OSD (On-Screen Display) languages are displayed.
2
7DS D ODQJXDJH ZLWK ÀQJHUWLS
» The OSD language is changed to the selected language
Carrying case for Hexagon head Screws
front panel screwpanel M4x8mm (x4)
Trim plate
3
7DS D UDGLR UHJLRQ ZLWK ÀQJHUWLS
» The OSD region is changed to the selected radio region
4
7DS )LQLVK EXWWRQ WR FRQÀUP
Rubber Remote control
User manual Quick start
cushion battery
guide
Pair the Bluetooth-enabled devices
Connect to
Pairing with unit
The +12V car battery which is live at all times.
The electric antenna control lead or power
1
Tap
supply lead of the antenna booster. If there is
2
Tap .
no electric antenna or antenna booster, or it
» The setting menu is displayed.
is manually operated telescopic antenna, it is
unnecessary to connect this lead. 3
Tap
A metal surface of the car. Connect the black 4
Tap [New Pairing] to search for Bluetooth device with your device
ground (earth) lead before connect the yellow
5
Select the name of desired device in the pairing list.
and red power supply leads.
6
Enter default password "0000" in your device.
The +12V power terminal which is live in the
» iI the pairing succeeds. the phone call record is displayed.
accessory (ACC) position of the ignition switch.
If there is no accessory position, connect to
the +12V car battery terminal that is always
Pairing with mobile phone
live. Ensure that black ground (earth) lead is
1
FRQQHFWHG WR D PHWDO VXUIDFH RI WKH FDU ÀUVW
Open your mobile phone and switch on Bluetooth.
2
Left speaker (Rear)
Search for other Bluetooth device with your device.
3
Select "CED780" in the pairing list.
Left speaker (Front)
4
Enter default password "0000".
» If the pairing succeeds, the dial screen is displayed.
Right speaker (Front)
Right speaker (Rear)
Make a call
1
Tap
» The dial screen is displayed.
Connect to/with
2
Extension wire Tap number icons directly to input phone number.
‡ Tap
‡ Tap
‡ Tap
3
Tap
Reverse camera (B+)
4
During talking, tap
Black lamp lead +
Receive call
Connected in step 1 above
Video out
1
Rear line out (Right)
If there is an incoming call, [Incoming call...] is displayed on the
screen.
Rear line out (Left)
2
Tap
Front line out (Right)
3
When conversation ends, tap
Front line out (Left)
Audio in (Right)
Audio in (Left)
Video in
Camera in
Subwoofer
OE remote
Radio antenna
External microphone
GPS smart antenna
to turn the unit on.
immediately.
immediately.
to display home menu.
to display Bluetooth setting menu.
on top of the screen.
to clear the last input.
to clear all input.
to go back to previous screen.
to start calling.
to display the keypad.
(green) to answer/accept the call.
(red) to terminate the call.