Safety Instructions; Limited Warranty - Bostitch FS32C Original Instructions Manual

SAFETY INSTRUCTIONS

GB
m IMPORTANT READ CAREFULLY: It is important that all operators read and understand all
sections of this Tool Technical Data manual and the separate Safety and Operating Instruction
Manual which come with this tool. Failure to do so could result in you or others in the working area to be
seriously injured.
m WARNING! Eye protection in accordance with 89/686/EEC, and with equal or greater grade than defined
in EN166 should be used. However all aspects of operators work, environment and other type/s of machinery
being used, should also be considered when selecting any personal protection equipment.
Note: Non-side shielded spectacles and face shields alone do not provide adequate protection.
Bostitch tools are precision built and designed for high speed, high volume fastening. They will deliver efficient,
dependable service when used correctly and with care. As with any fine power tool, the manufacturer's
instructions must be followed for best results. Please study this manual and understand the safety warnings
and cautions before operating the tool. The instructions on installation, operation and maintenance should be
read carefully and the manuals kept for reference. Note: Additional safety measures may be required because
of your particular application of the tool. Contact your Bostitch representative or distributor with any questions
concerning the tool and it's use.
NOTE: Bostitch tools have been designed to provide excellent customer satisfaction and are designed to
achieve maximum performance when used with precision Bostitch fasteners engineered to the same exacting
standards. Bostitch cannot assume responsibility for product performance if any of our tools are used with
fasteners or accessories not meeting the specific requirements established for genuine Bostitch nails, staples
and accessories.

LIMITED WARRANTY

Bostitch Inc., warrants to the original retail purchaser that this product is free from defects in material and
workmanship, and agrees to repair or replace, at Bostitch's option, any defective product within 90 days from
the date of purchase. This warranty is not transferable. It only covers damage resulting from defects in material
or workmanship, and it does not cover conditions or malfunctions resulting from normal wear, neglect, abuse or
accident.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO THE DURATION OF THIS WARRANTY.
BOSTITCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some countries do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state or from country
to country.
To obtain warranty service, you must return the product at your expense together with proof of purchase to a
Bostitch regional warranty repair center.
SPECIAL REFERENCES
Only those fasteners that are specified in the operating instructions (see Tool Technical data) should be used
in the tool. The tool and the specified fasteners are to be considered as one single safety system for safety
purposes.
Repairs shall only be carried out by the authorized agents of Bostitch or by other experts, giving due regard
to the safety, operating and maintenance instructions in this manual, the specific tool manual and in the Tool
Technical Data. Note: Experts are those who, as a result of professional training or experience, have acquired
sufficient expertise in the field of fastener driving tools as to be able to assess the safe condition of fastener
driving tools. Stands or jigs for mounting the tool to a support, for example a work table, shall be designed and
constructed by the stand manufacturer in such a way that the fastener driving tools can be safely fixed for the
intended use, thus avoiding for example damage, distortion or displacement.