Safety Instructions - Bostitch SC73462 Technical Data Manual

GB ©Stanley Bostitch. Not to be reproduced without permission. Unauthorised copies of this
document do not constitute CE compliance for the products.

SAFETY INSTRUCTIONS

F ©Stanley Bostitch. Reproduction interdite sans permission préalable. Les copies non autorisées
IMPORTANT READ CAREFULLY: It is important that all operators read and understand all
de ce document ne signifient en rien que les produits soient conformes aux normes CE.
sections of this Tool Technical Data manual and the separate Safety and Operating Instruction Manual which
come with this tool. Failure to do so could result in you or others in the working area to be seriously injured.
D ©Stanley Bostitch. Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte
WARNING! Eye protection in accordance with 89/686/EEC, and with equal or greater grade than defined in
Kopien dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.
EN166 should be used. However all aspects of operators work, environment and other type/s of machinery
being used, should also be considered when selecting any personal protection equipment. Note: Non-side
NL ©Stanley Bostitch. Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige
shielded spectacles and face shields alone do not provide adequate protection.
kopieën van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten.
WARNING! To prevent accidental injuries:
DK ©Stanley Bostitch. Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument
•
Never place a hand or any other part of the body in fastener discharge area of tool.
udgør ikke CE overholdelse for produkterne.
•
Never point tool at yourself or anyone whether it contains fasteners or not.
•
Never engage in horseplay.
•
SF ©Stanley Bostitch. Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt
Never pull the trigger unless the nose is directed towards the work.
•
Always handle the tool with care.
kopiot eivät muodosta tuotteille CE-yhdenmukaisuutta.
•
Do not pull the trigger or depress the trip mechanism whilst loading the tool.
•
To prevent accidental actuation and possible injury, always disconnect air supply.
G ©Stanley Bostitch. Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη
1. Before making adjustments. 2. When servicing the tool. 3. When clearing a jam. 4. When tool is not in use.
εξουσιοδοτημένα αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για
5. When moving to a different work area, as accidental actuation may occur, possibly causing injury.
τα προϊόντα.
•
Read the additional Safety & Operating instructions booklet before using tool.
•
Do not use oxygen and combustible gases as an energy source for pneumatically operated tools.
I ©Stanley Bostitch. Vietata la riproduzione senza permesso. Le copie non autorizzate di questo
•
The operation of this tool can cause sparks and act as a source of ignition for flammable fuels and gases.
documento non garantiscono la conformità CE per i relativi prodotti.
IMPORTANT! Tool Operation:
•
To identify the operation type of your model, check the ID label affixed to the tool/ rear of this manual and the
N ©Stanley Bostitch. Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette
corresponding table (marked ?) column L for that model. Read the corresponding section in the Safety &
dokumentet oppfyller ikke kravene for CE-merking for produktet.
Operating instructions for information of each trip type.
P ©Stanley Bostitch. Reprodução proibida sem autorização prévia. As cópias não autorizadas WARNING! Moveable Parts & Jaw (FIG 1)
•
deste documento não estão em conformidade com a CE para os produtos.
These tools feature moveable parts including the jaw to close the fasteners. Make sure only the material to be
fastened is placed within the jaws of this tool to avoid the danger of crushing of fingers. Keeps hands clear at all
times to prevent serious injury.
E ©Stanley Bostitch. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
documento no suponen la conformidad con las normas CE de los productos.
LOADING INSTRUCTIONS- SC7 Series (Fig 2A, 2B,3,4 )
1. Slide the fasteners onto the magazine rail (Fig 2A) towards the front of the magazine (Fig 2B)
S ©Stanley Bostitch. Prohibida la reproducción sin permiso. Las copias no autorizadas de este
2. Pull back the pusher past the fasteners (Fig 3)
documento no suponen la conformidad con las normas CE de los productos.
3. Gently release the pusher, so that it remains behind the fasteners, pushng them along the magazine (Fig 4)
LOADING INSTRUCTIONS- TR201, TR203, TR315 (Fig 5,6,7)
PL ©Stanley Bostitch. Niniejszy dokument nie może być kopiowany bez pozwolenia.
1. Disengage the latch and pull back magazine side. (Fig. 5)
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE
2. With magazine fully open, insert fasteners. Points must be against bottom of magazine. (Fig. 6)
prezentowanych produktów.
3. Push magazine forward and engage latch. (Fig. 7)
CZ ©Stanley Bostitch. Niniejszy dokument nie może być kopiowany bez pozwolenia.
Note: TR201 tools use a short magazine/pusher that holds up to 50 rings. The TR201 & TR315 models have a
Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE longer magazine/pusher that can hold up to 100 rings.
prezentowanych produktów.
Note: Use only fasteners recommended by Bostitch for use in Bostitch tools or fasteners which meet Bostitch
specifications
SK ©Stanley Bostitch. Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto
dokumentu nie sú v súlade s CE pre dané výrobky.
HU ©Stanley Bostitch. A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül
sokszorosított dokumentum nem jelenti a termék CE-megfelelőségét.
GB