Cabling Iscsi Ports - Hitachi VSP F370 System Installation

Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. Connect the Fibre Channel data ports on each storage system controller to your
Fibre Channel switch.
2. Connect your Fibre Channel switch to the Fibre Channel HBA card in each host
computer or server.

Cabling iSCSI ports

Each controller supports 10-gigabit Ethernet copper (RJ-45) or optical (fiber) iSCSI
connectivity to your data network.
Important: For important information and instructions about connecting to
hosts, refer to the Open-Systems Host Attachment Guide.
Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. Using the appropriate cable, connect the iSCSI data ports on each storage system
controller to your Gigabit Ethernet network switch.
Installing your storage system
Storage system installation (without SVP)
Cabling iSCSI ports
29