Table of Contents
Advertisement
3.6. Configure the Avaya SIP Enablement Services (SES)
The following steps describe the administrative procedures for configuring the Avaya SIP
Enablement Services to enable collaboration with the Avaya Meeting Exchange
Enterprise S6800 Conferencing Server and Avaya G860 Media Gateway using host
mapping.
•
SES-MX6800 for dial in calls to MX
•
SES-G860 for dial out calls from MX
•
Adding Trusted Hosts
Step
Description
3.6.1
Configure host mapping in SES for the following:
RJ; Reviewed:
SPOC 3/23/2009
• SES-S6800 for dial in calls from MX
• SES-G860 for dial outs from MX
• Open the SES web page http://192.168.36.11/admin ,enter the
appropriate credentials, Click on Launch SES Administration
Interface.
• Click on Hosts Tab->List Hosts tab and Click on Map .
•
Add the host map from Avaya SIP Enablement Services to the
Avaya G860 Media Gateway by clicking Add Map in New Group
and Add another Contact.
•
Repeat the same for mapping from Avaya SIP Enablement Services
to Avaya Meeting Exchange Enterprise S6800 Conferencing Server
as shown below.
•
The Screen shot show ports configured as 5060/UDP it should be
5061 if it is TLS as per Figure1.
Solution & Interoperability Test Lab Application Notes
©2009 Avaya Inc. All Rights Reserved.
31 of 71
MXS6800SES-G860
Advertisement
Table of Contents
