Clock - Xavant STIMPOD NMS 450X Manual

Clock

The clock can be used as either a real time clock, a stopwatch or as a timer indicating the time since the start of
the session.
1 1
Fig. 13:
1. Select the clock.
2. The current local time.
3. Select the stopwatch.
4. The stopwatch time.
5. The pause button. This will prevent the stopwatch from counting up while keeping the current stopwatch value.
6. The start button. When clicked, this will cause the stopwatch to continue counting up from the current value
(00:00 initially). The start button will have a grey background if the stopwatch is running.
7. The reset button will clear the current stopwatch value (set to 00:00).
8. Select the session timer.
9. The time since the session was created.
3
2
Intelli Cable Software: NMShow
5 6
4 7 8
STIMPOD NMS450X
9
18