Tab Controls; Stimulation Details; Zoom Controls - Xavant STIMPOD NMS 450X Manual

STIMPOD NMS450X
Intelli Cable Software: NMShow

Tab Controls

These controls change the contents of the main display area. Clicking the Profile tab control will display a graph to visualize
the results of all the stimulations for the current session, showing the depth of the block in different zones. This presents
the results of the session in a single view, allowing for an overview of the full procedure.
The user can click on the Pulse Data tab control to view the results of a single stimulation sequence. This will display the
bars for each pulse of the selected stimulation as is displayed on the Stimpod.
The third tab controlis the Data Table and displays the data for each stimulation in tabular format, including a time stamp,
measured and set current, the stimulation result and the stimulation mode.

Stimulation Details

The stimulation details bar indicates the result, set and measured currents and the mode for a selected stimulation
sequence. This will be shown for both the profile and the pulse data graphs.
Fig. 7.2:

Zoom Controls

The zoom controls allow the user to show the profile graph in more detail. Click the magnifying glass with the plus or minus
sign to zoom in or out. Please note that the zoom is relative and affected by the number of stimulation sequences which
have been recorded.
10