Random Play; Programmed Playback; Important Notes - Ricatech RMC430 User Manual

RANDOM PLAY

1. While playing a CD, press the RANDOM button /
display. The unit will randomly select songs from the CD and play them in any order.
2. To cancel Random Playback, press the Stop button.

PROGRAMMED PLAYBACK

1. Make sure the CD is stopped.
2. Press the PROGRAM button /
3. Press the or
4. Press the PROGRAM button /
5. Repeat steps 3 and 4 above to program additional tracks into memory.
6. When all the selected tracks have been programmed into memory, press the CD Play/Pause button /
disc in the designated order.
NOTE: A maximum of 35 tracks can be programmed into memory.

IMPORTANT NOTES:

· When using the Aux-in or Line-in function, press the CD power button to power off the CD Player first.
· During CD Player use or when recording from CD to CD, make sure you do not connect or disconnect the cable to or
from the Aux-in or Line-in Jacks.
Playing a CD via the CD Player
NOTE: This CD Player cannot be operated by Remote Control.
1. Press the FUNCTION button /
2. Press the CD Power button to turn the CD Player on. The SUB LCD Display will flash " - - " and then show " 00 "
3. Press the "EJECT" button to open the CD Drawer Door.
4. Place a disc in the tray with the label side of the disc facing up.
5. Press the Eject button again to close the CD Door. The SUB. LCD display will show " - - " for a few seconds, then the
total number of tracks on the disc will be displayed. " 00 " will show when there is no disc inside the tray.
6. Press the PLAY/PAUSE button to start playback. The current playback track will show on the SUB LCD display.
7. Turn the VOLUME KNOB to adjust the sound volume level.
8. To pause playback, press the PLAY/PAUSE button. The currently playing track number will flash. Press the
PLAY/PAUSE button again to resume playback.
9. To stop playback, press the STOP button. The total number of tracks on the disc will show on the display.
Skip Forward and Backward
1. Press the PLAY/PAUSE BUTTON to start playing the selected track.
2. Press the FORWARD SKIP+ BUTTON or the BACKWARD SKIP- BUTTON to select a track.
Search Forward and Backward during Playback
1. During Play mode, press and hold the FORWARD SKIP+ BUTTON or the BACKWARD SKIP- BUTTON to search
forwards or backwards though the selected track.
2. Release the button at the desired point, playback will resume automatically.
PROGRAMMED PLAYBACK
1. Press the PROGRAM BUTTON. "PROG" " 01" will show and flash on the display.
2. Press the FORWARD SKIP+ BUTTON or the BACKWARD SKIP- BUTTON to select a track.
. "MEMORY", "PGM 1" will show on the display, and "MEMORY" will flash.
buttons to select a desired track.
twice to store the selected track number, "MEMORY" will stop flashing now.
to select CD/AUX mode.
on the remote control. "RANDOM" will show on the LCD
to play the