Repeat Playback - Ricatech RMC430 User Manual

CD OPERATION
Playing a CD via the CD Recorder/Player
NOTE: This CD Player can also be operated by Remote control.
1. Press the FUNCTION button / until " CD LOAD " shows on the display for a few seconds and then " NO DISC " if
no CD has been detected in the tray.
2. Press the EJECT button / to open the CD drawer. "OPEN " will show on the display. Insert a CD into the tray
with the label side facing up.
3. Press the EJECT button / again to close the CD drawer – " CLOSE " will show on the display. The display will
show " CD LOAD " for a few seconds while the contents of the CD is being read and then automatically start playing back
the first track on the CD.
Skipping Forwards & Backwards on the Control Panel & Remote Control
1. To skip forwards or backwards through the tracks on a CD, press the or buttons.
2. To fast forward or rewind a track, press and hold the or buttons.
3. Release the buttons once you reach the desired position on the track.

REPEAT PLAYBACK

To repeat a Single Track
1. Select the desired track number and press the REPEAT button / once. Then press the PLAY/PAUSE button /
*
. "REPEAT " will show on the display and after the track has finished playing, it will play again.
To repeat a complete CD
1. Press the REPEAT button / twice. The display will show "REPEAT ALL". Once the disc has finished playing,
the whole disc will start playing from the beginning again.
2. To turn the Repeat function off, press the REPEAT button / again. "REPEAT" will disappear from the LCD
display.