Set Time And Date; Play; Play From Ipod/Iphone - Philips AJ5300DB User Manual

Set time and date

1
In standby mode, press and hold TIME SET
on the back of your clock radio for more
than two seconds.
» [12H] or [24H] begins to blink.
2
Press / repeatedly to select 12/24
hour format.
3
Press TIME SET to confirm.
» The hour digits begin to blink.
4
Repeat steps 2-3 to set hour and minute.
Note
•
If clock is not manually set, when iPod/iPhone is
connected, the unit synchronizes time from the iPod/
iPhone automatically.
Tip
•
The accuracy of the transmitted time depends on the
docked iPod/iPhone that transmits the time signal.
6 EN

4 Play

Play from iPod/iPhone

You can enjoy audio from iPod/iPhone through
this clock radio.
Compatible iPod/iPhone
The unit supports the following iPod, iPhone
models:
Made for.
• iPod classic
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
Install HomeStudio App
Philips HomeStudio app brings a suite of new
features to your clock radio, including FM radio
programming and a multi-function alarm clock.
To enjoy more features, you are recommended
to install this free HomeStudio app.
Note
•
Make sure that your iPod/iPhone is connected to the
Internet.
1
Press SOURCE repeatedly to select
DOCK mode.