Turn On; Switch To Standby; Set Time And Date - Philips AJ7050D/79 User Manual

Turn on

• Press .
» The unit switches to the last selected
source.

Switch to standby

• Press again to switch the unit to standby
mode.
» The time and date (if set) appear on
the display panel.

Set time and date

1
In standby mode, press and hold SET TIME
for 2 seconds.
» [24H ] begins to blink, and you can
hear a beep.
2
Press TUNE+ or TUNE- to select the
12/24 hour format.
3
Press OK to confirm.
» 00:00 will display, and the hour digits
begin to blink.
4
Repeat steps 2-3 to set the hour, minute,
month, day and year.
Tip
•
In 12 hour format, [MONTH--DAY] is displayed.
•
in 24 hour format, [DAY--MONTH] is displayed.
Note
•
When iPod/iPhone/iPad is connected, the docking
unit synchronizes time from the iPod/iPhone/iPad
automatically.
EN
8