Set Time And Date; Turn On - Philips DC320 User Manual

3
Connect the other end of the AC
adaptor to the wall outlet.

Set time and date

1
In standby mode, press and hold SET
TIME/PROG for 2 seconds.
»
[12 HR] begins to blink.
2
Press / to select 12/24 hour format.
3
Press SET TIME/PROG
»
The hour digits begin to blink.
4
Press / to set the hour.
5
Press SET TIME/PROG
»
The minute digits begin to blink.
6
Repeat steps 4-5 to set the minute, year,
month, and day.
Tip
In 12 hour format, [MONTH--DAY] is
displayed.
in 24 hour format, [DAY--MONTH] is
displayed.

Turn on

1
Press POWER.
»
The unit switches to the last selected
source.
Switch to standby
1
Press POWER again to switch the unit to
standby mode.
»
The time and date (if set) appear on
the display panel.
EN 11