Adjust Volume; Other Features; Set Alarm Timer - Philips AJ5300DB User Manual

2
Connect the MP3 link cable (not supplied)
to:
• the MP3-LINK socket (3.5mm) at the
back of your clock radio.
• the headphone socket of an external
device.
3
Start to play the device (see the user
manual of the device).

Adjust volume

VOLUME
8 EN

5 Other features

Set alarm timer

Set alarm
You can set two alarms to ring at different time.
Buzzer, FM radio, or your last listened audio in
the iPod/iPhone can be selected as alarm sound.
Note
•
Make sure that you have set the clock correctly.
1
Press and hold AL1/AL2 for more than
two seconds to activate alarm setting
mode.
» The hour digits and alarm icon begin
to blink.
2
Press / repeatedly set the hour.
3
press AL1/AL2 to confirm.
» The minute digits begin to blink.
4
Repeat steps 2-3 to set the minute, select
an alarm source (buzzer, FM radio, or
dock), and adjust volume.
Tip
•
If iPod/iPhone is selected as alarm source, but no iPod/
iPhone is connected, the clock radio switches to buzzer
source instead.
•
For the alarm(s) set through the clock radio, you
can also select the nature sounds stored in the
HomeStudio app as alarm sound.