Honeywell ScanPal EDA61K Series Quick Start Manual page 14

About Provisioning Mode
After completing the out-of-box set up process, Provisioning
mode is automatically turned off. Scanning a barcode to install
applications, certificates, configuration files, and licenses on
the computer is restricted unless you enable Provisioning mode
in the Settings app. To learn more, see the user guide.
Scan a Barcode with the Scan Demo
For optimum performance, avoid reflections by scanning the
barcode at a slight angle.
1. Swipe up on the screen to access all apps.
Select Demos > Scan Demo.
2.
3. Point the computer at the
barcode.
4. Touch Scan on the screen or
press and hold any Scan
button. Center the aiming
beam over the barcode.
The decode results appear on the
screen.
Note: In the Scan Demo app, not all barcode symbologies are
enabled by default. If a barcode does not scan, the correct
symbology may not be enabled. To learn how to modify the
default app settings, see the user guide.
13