Subscribe to Our Youtube Channel
Related Manuals for Honeywell ScanPal EDA5S-0
Summary of Contents for Honeywell ScanPal EDA5S-0
- Page 1 ScanPal™ EDA5S Series powered by Android™ Quick Start Guide eda5s-a-en-qs-01 rev A 8/21...
-
Page 2: Memory Card Specifications
Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional... -
Page 3: Computer Features
Computer Features Imager Window (LED/Laser Aperture) Front Camera Battery Status/ Notification LED Power Button Scan Status LED Scan Button Touch Panel Microphone... - Page 4 Note: Wrist strap not shown. Laser Safety Label Location Nano SIM and/ or MicroSD Card Slot...
- Page 5 Speaker Camera Lens and Flash Volume Button Microphone Scan Button Battery Cover USB, Type C...
- Page 6 Install a Nano SIM Card(s) Install a microSD Card (Optional) Note: Format the microSD card before initial use. Note: Always power off the computer before attempting to install or remove a card.
-
Page 7: About The Battery
The mobile computer ships with a 3.85 VDC, 11.78 watt-hour Li-ion battery manufactured for Honeywell International Inc. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Nous recommandons l’utilisation de batteries Li-ion de la marque Honeywell. -
Page 8: Install Battery
Install Battery... - Page 9 If the mobile computer is drawing more current than supplied by the charging source, charging will not take place. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
-
Page 10: Turn Power On/Off
About the USB Type C Connector You can use a USB cable to charge the mobile computer from a host device (e.g., laptop or desktop computer). The connected host device must supply a minimum power output of 5V, 0.5A to the EDA5S or the battery will not charge. -
Page 11: About The Home Screen
Adjust the Screen Timeout To adjust the amount of time before the display sleeps after inactivity: Swipe up on the touch screen. Select Settings > Display > Advanced > Screen Timeout. Select the amount of time before the display goes to sleep. About the Home Screen Notification / Status Bar... -
Page 12: Navigation And Function Buttons
Navigation and Function Buttons For button locations, see Computer Features on page 2. Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Touch the front (on-screen) Scan button to trigger the scanner. - Page 13 About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Barcode with the Scan Demo For optimum performance, avoid reflections by scanning the barcode at a slight angle.
- Page 14 Sync Data To move files between your EDA5S and a computer: Connect the EDA5S to your computer using a USB charge/ communication accessory. On the EDA5S, swipe down from the top of the screen to see the notifications panel. Touch the Android System notification twice to open the options menu.
- Page 15 Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. Press and hold the Power button until the options menu appears.
-
Page 16: Limited Warranty
Trademarks Android is a trademark of Google LLC. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.
Need help?
Do you have a question about the ScanPal EDA5S-0 and is the answer not in the manual?
Questions and answers